Get a quote
Guide · Chimney breasts

Why a disused chimney needs air at the top and bottom

A chimney that is no longer used, or a breast left in place after others are removed, can trap moisture. A vented cap on top and an air vent low down keep air moving through it.

A Victorian London terrace in yellow and red brick with bay windows and chimney stacks topped with rows of clay pots

In short

  • A sealed chimney traps moisture. Damp in the flue mixes with old soot and comes through as brown stains.
  • Cap the top with a ventilated cap or cowl that keeps rain out and lets air through.
  • Fit a vent near the bottom of the breast in the room, so air can flow up the flue.
  • Breasts kept in the loft after a removal need the same treatment.

Why a sealed chimney gets damp

A working chimney is kept dry by the warm air rising through it. Once it is no longer used, and especially once the fireplace is bricked up, there is nothing moving the air. Rain gets in at the top, moisture soaks in through the brickwork, and condensation forms inside the flue.

Years of soot line the inside of an old flue. When that soot gets wet, salts in it are carried through the brickwork and plaster. The result is the brown or yellow patch on a chimney breast that comes back however many times it is painted.

How to ventilate a chimney properly

London borough building control guidance recommends the same approach for breasts left in place after removal work: a ventilated cowl on the pot and an air brick at low level, so the flue can dry by natural air movement.

  • At the top: remove the pot or fit a ventilated cap or cowl. It stops rain getting in but lets air out. A solid slab or a pot filled with mortar traps the moisture in.
  • At the bottom: fit a vent in the bricked-up fireplace opening, or an air brick low down in the breast, so air enters from the room.
  • In between: the flue has to be clear enough for air to pass, so any debris or nests may need clearing first.

Breasts left in the loft after a removal

When chimney breasts are removed on the lower floors but the loft section and stack are kept on steels, the flue is cut off at the bottom. It still needs air. A vent into the loft at the base of the remaining breast, with a ventilated cap on top, keeps it from sweating.

If the stack is removed below the roof, the top of the remaining breast is sealed inside the loft. It should still be able to breathe, so air can reach it from the loft space.

When the stain is something else

Not every damp patch on a chimney breast is condensation. Failed flaunching on top of the stack, cracked pots, worn pointing or missing lead flashings let rain straight in. If the staining is worse after heavy rain, or appears near the ceiling first, the stack itself needs looking at. Ventilation will not fix a stack that leaks.

Questions

Should a disused chimney be capped?

Yes, but with a ventilated cap or cowl, not a solid seal. It should also have a vent near the bottom so air can move through the flue.

Why is there a brown stain on my chimney breast?

Usually moisture in the flue carrying salts from old soot through the plaster. Check the stack for leaks first, then make sure the chimney is ventilated top and bottom.

Get a quote

Describe the project and where it is. We’ll reply to arrange a visit, then send an itemised written quote.

  1. We reply within 2 working days
  2. We visit and look at the project properly
  3. You get an itemised, provisional quotation

Rather talk it through? Call or WhatsApp Lee on 07875 545032.

Photos help. Send them from the contact page or reply to our email with them.

What’s it about?

We reply to every enquiry within 2 working days. Your details are only used to reply about this project.

Enquiry sent

Thanks, that’s with LR Building

We reply to every enquiry within two working days.

Not heard back by then? Call or WhatsApp Lee on